Hioki LR8450 - Changing and Accepting Settings

78
Basic Operation
Changing and accepting settings
1
Select the setting you wish to congure with the Left Arrow, Right Arrow, Up Arrow, and
Down Arrow keys.
You can now congure the setting with focus (shown in yellow).
Focus
2
Press the ENTER key.
The available settings will be displayed.
Available settings
3
Select the desired setting with the Up Arrow and Down Arrow keys and then press the
ENTER key.
The setting will be accepted.
Pressing the ESC key will cancel the settings.
You can also change the channel being congured with the following keys:
• UNIT/SHEET keys: Changes the measurement module number.
• CHANNEL keys: Changes the channel number.
HIOKI LR8450A963-02