Hioki LR8450 - Inserting and Removing USB Drives

71
SD Memory Card and USB Drive
Inserting and removing USB Drives
Inserting a USB Drive
1
Align the plug of the USB Drive with the USB port of the instrument.
2
Insert the USB Drive as far as it will go.
Removing a USB Drive
1
Verify that the instrument is not accessing the USB Drive (saving or writing data, etc.).
2
Press the FILE key to display the FILE screen.
3
Press the Left Arrow and Right Arrow keys to choose [USB]
4
Press the ENTER key while [Eject] is selected.
The [Eject media] window will be displayed.
5
Press the ENTER key while [OK] is selected.
After the message [USB ash drive can be safely removed] has been displayed, you can remove
the USB Drive.
6
Remove the USB Drive.
Replacing media
• You can replace an SD Memory Card or USB Drive while real-time saving is enabled.
See “3.3 Saving Data” in the Instruction Manual.
• If an FTP client connects to the instrument, ejecting media will cause a failure. Close the FTP
client connection before conducting the procedure for ejecting the media again.
Making Connections (Preparing for Measurement)
HIOKI LR8450A963-02