suitable container. Never reuse the paper dust
bag or empty it or dispose of it into a fire. If a
cloth bag is used empty into a suitable container
being careful to contain the dust. Do not dispose
of the contents into a fire.
10. Fit a new paper dust bag or refit the cloth bag.
Reconnect the floor sander to the power supply
and continue sanding.
11. When taking a break from work disconnect the
power cable from the supply, remove and
dispose of the paper dust bag, or empty the cloth
bag as detailed in 8. above. Never leave the
floor sander unattended with the dust bag in
place containing dust.
12. On completion disconnect the power cable from
the supply. Remove and dispose of the paper
dust bag, or empty the cloth bag as detailed in 8.
above. Stow the cable on the handle assembly
and if required dismantle for transportation.
Carry out maintenance as recommended in
Maintenance and Servicing.
DANGER - never leave the floor sander
unattended with dust in the dust bag.
Always remove the dust bag and dispose
of into a suitable container.
4
unsanded boards
sanded boards
level very uneven
floors by sanding
diagonally in both
directions
unsanded boards
unsanded boards
Level uneven floors.
Sand main floor area.
Sand and blend edges in with main floor area
.
FLOOR SANDING TECHNIQUE
Plank and Strip Floors - sand in the
direction the boards are laid, with the
wood grain.
-Parquet and Wood Block Floors
sand in the direction of the main
source of natural light. If there is no
natural source of light, sand in the
direction of the longest side of the
room. If the room is square, sand in
the direction the furniture is laid out
and how people normally use the
room.
To Next Page
Loading...
