Access to CLI
14
2.1
Preparing the connection
RM CLI EAGLE 20
Release
4.3
09/08
2.1 Preparing the connection
Information for assembling and starting up your EAGLE 20 Industrial
ETHERNET Firewall can be found in the “Installation” user manual.
Information for configuring your EAGLE 20 Industrial ETHERNET Firewall
can be found in the “Configuration” user manual.
Connect your Firewall with the network.
The network parameters must be set correctly for the connection to be
successful.
You can access the user interface of the Command Line Interface with the
freeware program “PuTTY”. This program is located on the product CD.
Make sure that PuTTY is installed on your computer.
If the required programs are not already installed on your PC, please in-
stall them.
To Next Page
Loading...
