Using the CLI
RM CLI EAGLE 20
Release
4.3
09/08
3.3
Properties of the CLI
35
3.3.4 Line length
If you are using a terminal with a line length of 80 characters, the help texts
are split up, as shown in the following screenshot (see fig. 12). For example,
for the help text for “DSA Fingerprint for SSH”, the remainder “01:10:12” ap-
pears on the next line.
You can avoid this effect by using a terminal with a line length of 132 charac-
ters (see fig. 13).
Figure 12: “Show login” command with a line length of 80 characters
!(Hirschmann Eagle) #show login
Login parameters
----------------
Access per SSH..........................enabled
SSH Access port number..................22
DSA Fingerprint for
SSH................."27:14:2f:f6:88:e8:6a:e6:3c:36:1c:5c:c2:
01:10:12"SRA Fingerprint for
SSH................."b2:ee:4f:af:76:23:80:ba:ef:25:5a:42:a5:
a8:e7:e1"
Access per Web (HTTPS)..................enabled
Web Access port number (HTTPS)..........443
SNMP version 1..........................enabled
SNMP version 2..........................enabled
SNMP port number........................161
Inactivity timeout Web (minutes)........0
Inactivity timeout serial (minutes).....0
Inactivity timeout SSH (minutes)........120
Login prompt............................"Hirschmann Eagle"
To Next Page
Loading...
