Hirschmann EAGLE 20 - Properties of the CLI; Input Prompt

Using the CLI
RM CLI EAGLE 20
Release 4.3 09/08
3.3 Properties of the CLI
31
3.3 Properties of the CLI
3.3.1 Input prompt
 Command mode
With the input prompt, the CLI shows you which of the three modes you
are in:
X (Hirschmann Eagle)>
User Exec mode
X (Hirschmann Eagle)#
Privileged Exec mode
X (Hirschmann Eagle)(config)#
Global Configuration mode
 Exclamation mark and asterisk
Exclamation mark “!”
An exclamation mark “!” in the first position of the input prompt shows you
that the password for the user “admin” is still on the default setting.
!*(Hirschmann Eagle) >
Asterisk “*”
An asterisk “*” in the first or second position of the input prompt shows you
that the settings in the volatile memory and the settings in the non-volatile
memory are different.
!*(Hirschmann Eagle)>
*(Hirschmann Eagle)>