Hirschmann EAGLE 20 - Data Entry Elements

Using the CLI
34
3.3 Properties of the CLI
RM CLI EAGLE 20
Release 4.3 09/08
3.3.3 Data entry elements
 Command completion
To facilitate making entries, CLI gives you the option of command com-
pletion (Tab Completion), meaning that you can abbreviate key words.
 Type in the beginning of a keyword. If the characters entered identify
a keyword, CLI will complete the keyword when you press the tab key
or the space key.
After the first letters are entered, the Command Line Interface adds the
rest of the possible command or parameter when you press the “Tab” or
“Space” keys. If there is more than one option for completion, the system
does not perform any completion. Only after one or more letters have
been entered which uniquely identify the command or parameter does the
system complete the command or parameter when “Tab” or “Space” is
pressed again.
If you make a non-unique entry and press “Tab” or “Space” twice, the CLI
provides you with a list of options.
 Possible commands/parameters
You can obtain a list of the commands or the possible parameters by en-
tering “help” or “?”, for example by entering (Hirschmann Eagle) >show ?.
When you enter the command displayed, you get a list of the parameters
available for the command “show”.