Hirschmann EAGLE 20 - Rm Cli Eagle

Access to CLI
20
2.3 CLI via the V.24 port
RM CLI EAGLE 20
Release 4.3 09/08
 Enter the password. The default setting for the password is private .
Press the Enter key.
You can change the user name and the password later in the Command
Line Interface.
Please note that these entries are case-sensitive.
The start screen appears.
Figure 6: CLI screen after login
Note: You can configure the V.24 interface either as a modem interface or a
terminal/CLI interface.
However, to be able have at least limited access to the CLI interface in
modem mode, you connect your terminal (setting on terminal: 9600 baud) to
the V.24 interface.
Press any key on your terminal keyboard a number of times until the login
screen indicates the CLI mode.
NOTE: Enter '?' for Command Help. Command help displays all options
that are valid for the particular mode.
For the syntax of a particular command form, please
consult the documentation.
(Hirschmann Eagle) >