Access to CLI
RM CLI EAGLE 20
Release
4.3
09/08
2.3
CLI via the V.24 port
19
2.3 CLI via the V.24 port
A serial interface is provided on the RJ11 socket (V.24 interface) for the local
connection of an external management station (VT100 terminal or PC with
corresponding terminal emulation). This enables you to set up a connection
to the Command Line Interface (CLI) and to the system monitor.
You will find a description of the V.24 interface in the “User Manual
Installation”.
Connect the device to a terminal via V.24 or to a “COM” port of your PC
using terminal emulation based on VT100, and press any key.
After the connection has been made successfully, a window for entering the
user name appears on the screen.
Figure 5: Logging in to the Command Line Interface program
Enter a user name. The default setting for the user name is admin . Press
the Enter key.
Copyright (c) 2007-2008 Hirschmann Automation and Control GmbH
All rights reserved
Eagle NG Release SDV-04.3.00-A07
(Build date 2008-03-07 18:06)
System Name: EAGLE-000000
Netw. Mode : transparent
Mgmt-IP : 192.168.1.1
Base-MAC : 00:80:63:45:BE:5D
System Time: FRI JAN 02 01:50:47 1970
(Hirschmann Eagle)
User:
To Next Page
Loading...
