System Description
© 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 13
50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk
(12) Rotary selection wheel with pushbutton
This central rotary selection wheel is used to navigate within the
menu structure.
At first select the desired soft key symbol .
By pressing the button of the rotary wheel the marked function is
carried out.
select
symbol
▼ LMI main screen (1
st
level of function keys)
< show info screens
< start operation mode setup
< set geometrical limits
< start TARE function
< switch to 2
nd
level of function keys
▼ LMI main screen (2
nd
level of function keys)
< back to the previous menu
< show LMI value screen
< show service menu (code required)
< show CAN-bus menu
To Next Page
Loading...