Hirschmann Manitex vSCALE D3 - User Manual

vSCALE D3
Operating console
SLI system
Manitex Telescopic Crane
Contents
Safety instructions
1
Product description
2
Installation / Wiring
3
Commissioning
4
Operation
5
Maintenance / Repair
6
Appendix
7
User manual
Issue B - 03/2012
This document has the order no.
50-700-19-2001_422175_en
Pub Mtx p/n: 7600004-023
Date: April 2012
For System: 4800850-001

Summary

Introduction to the vSCALE D3 Manual

Marking of Notices and Symbols

Explains the symbols used for warnings and important information within the manual.

Safety Instructions for vSCALE D3

EC Conformity Declaration Details

Details the console's compliance with the EMC directive and relevant harmonised standards.

vSCALE D3 Product Description

Product Identification and Type Plate

Describes the type plate and its role in identifying the operating console.

Intended Use and System Limitations

Defines the specific tasks the vSCALE D3 console is designed for and clarifies limitations.

Functional Elements Overview

Identifies and explains the various physical and display elements of the vSCALE D3 console.

Installation and Wiring Guide

Console Installation Procedures

Details console mounting options including surface and recessed types, and necessary accessories.

Electrical Connection Interfaces

Explains wiring and connection interfaces like central, Ethernet, and camera ports.

Commissioning the vSCALE D3 Console

Switching the Device On and Off

Explains the automatic power-on sequence of the console and initial display states.

Adjust SLI to Latest Set-up Status

Guides through the step-by-step SETUP procedure for configuring the SLI to the current crane setup.

Zero Point Adjustment of Sensors

Describes the process for adjusting the zero point of various sensors using the service menu.

Operating the vSCALE D3 Console

Understanding Functional Elements

Details the purpose and function of the console's display elements, keys, and rotary control.

Navigating the SLI Main Menu

Presents the primary operating screen and access points to various functions and menus.

SLI Setup and Configuration

Explains the need to reset the SLI to the current crane set-up status via the SETUP procedure.

Crane Configuration Overview

Illustrates the current crane configuration, showing boom, winch, and support base details.

Working Area Monitoring Functions

Details programmable functions for monitoring geometrical limits like height, radius, and angles.

Live Video Image Display Option

Describes how to optionally blend live video from cameras into the console display.

Crane Inclination Display

Shows how to display crane inclination using a virtual spirit level and numerical tilt values.

Load Taring Functionality

Explains how to tare the load display to show net load (payload) by excluding rigging weight.

Suppressing Acoustic Alarms

Describes how to temporarily suppress the acoustic alarm using a function key.

Accessing Info Menu Information

Details accessing system information like operating hours, digital inputs/outputs, and CAN bus sensor readings.

Service Menu and Sensor Calibration

Explains how to access the service menu for safety-relevant settings and sensor calibration.

Maintenance and Repair Procedures

Appendix and Technical Information

Technical Data Specifications

Provides key technical specifications for the vSCALE D3 console, including voltage, display, and dimensions.

Error Codes Troubleshooting Guide

Lists and describes various error codes that may be displayed by the system for troubleshooting.

Hirschmann Manitex vSCALE D3 Specifications