Hirschmann Manitex vSCALE D3 - Operating the vSCALE D3 Console

Operation
5 Operation
This chapter contains information, advice and instructions for using the console.
You will also find the description of function elements, functions and menus.
Function keys
Functional elements
Display
with
Function keys
“HOME” key
(call up SLI main menu)
Rotary control
(encoder) with
pushbutton function
Status display
SLI main menu
After correct adjustment of the SLI to the current setup status of the crane the SLI is ready for use.
(See chapter
4.2)
The crane driver must be familiar with all operating elements of the SLI before commencing crane
operation.
All settings must be checked by hoisting a known load and comparing the information with that
displayed by the SLI.
WARNING
Imminent threat of personal injury and damage to property due to incorrect system settings!
The correct adjustment of the SLI to the current set-up status is essential for the correct
function of the system and of the crane.
The correctness of these settings must be guaranteed before starting the crane operations!
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com 30/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.