Hirschmann Manitex vSCALE D3 - Luffing Angle Monitoring

Operation
5.5.3 Luffing angle monitoring
Programmable function for monitoring the upper/lower luffing angle.
Calling up the luffing angle monitoring function
from the LIMIT menu:
Luffing angle limit
symbol:
Limit not
programmed or
inactive
Limit active
Limit value reached
or exceeded
Current luffing angle
Saved limit value
of lower luffing angle
Switch on/off
lower luffing angle
monitoring
Save
current angle
as lower limit value
Back to LIMIT menu
Saved limit value
of upper luffing angle
Switch on/off
upper luffing angle
monitorin
g
Save
current angle
as upper limit value
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com 40/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.