Product description
2 Product description
The vSCALE D3 console is the operable component of the programmable safe load indicator,
referred to below as the “SLI”. The SLI detects the readings from different sensors and recognises
crane overload statuses depending on further parameters. Visual and acoustic signals alert the
user of the overload status.
The SLI comprises:
a cSCALE S6 central control unit
the vSCALE D3 display and operating console
various sensors for detection of readings
The control unit, sensors and operating consoles are installed in suitable positions onto or inside
the crane.
The vSCALE D3 console is used for:
programming and inputting operating parameters
displaying the current crane operating data
This user manual contains information about installation, commissioning, operation and sensor
calibration and about repairs and maintenance.
Scope of manual
2.1 Product identification
The type plate carries the unique identification of the operating console. It is located on the back of
the device.
Please ensure you make a note of all the information on your type plate for queries about this
product.
Type plate
(Example)
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com 7/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.
To Next Page
Loading...