Programming
© 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 27
50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk
back to limits main menu
store actual boom position
as minimum radius limit
switch minimum radius limit
on/off
store actual boom position
as maximum radius limit
switch maximum radius limit on/off
After limitation is switched on, the limit value and the respective status symbol appears. The symbol will blink, if
one limit value is reached or exceeded:
back to limits main menu
store actual boom position
as minimum radius limit
switch minimum radius limit on/off
store actual boom position
as maximum radius limit
switch maximum radius limit on/off
To Next Page
Loading...