Programming
© 2008 HIRSCHMANN Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann-usa.com 31
50 650 19 0201e_Rev C (LinkBelt278).doc / 2008-08-18 / Rev. C / rk
back to limits main menu
store actual boom position
as maximum boom angle limit
switch maximum angle limit on/off
store actual boom position
as minimum boom angle limit
switch minimum angle limit on/off
After limitation is switched on, the limit value and the respective status symbol appears.
The symbol will blink, if one limit value is reached or exceeded.
back to limits main menu
store actual boom position
as maximum boom angle limit
switch maximum angle limit on/off
store actual boom position
as minimum boom angle limit
switch minimum angle limit on/off
To Next Page
Loading...