About this Manual
Redundanz L2P
Release
5.0
04/09
5
About this Manual
The “Redundancy Configuration” user manual contains all the information
you need to select a suitable redundancy procedure and configure it.
The “Basic Configuration” user manual contains all the information you need
to start operating the device. It takes you step by step from the first startup
operation through to the basic settings for operation in your environment.
The “Installation” user manual contains a device description, safety instruc-
tions, a description of the display, and all the other information that you need
to install the device before you begin with the configuration of the device.
The “Industry Protocols” user manual describes how the device is connected
by means of a communication protocol commonly used in the industry, such
as EtherNet/IP and PROFINET.
The "Web-based Interface" reference manual contains detailed information
on using the Web interface to operate the individual functions of the device.
The "Command Line Interface" reference manual contains detailed informa-
tion on using the Command Line Interface to operate the individual functions
of the device.
The Network Management Software HiVision/Industrial HiVision provides
you with additional options for smooth configuration and monitoring:
X Configuration of multiple devices simultaneously.
X Graphical interface with network layouts.
X Auto-topology discovery.
X Event log.
X Event handling.
X Client / Server structure.
X Browser interface
X ActiveX control for SCADA integration
X SNMP/OPC gateway
To Next Page
Loading...
Need help?
General
