Hirschmann PAT DS 85/0002

To Next Page

To Previous Page

Calibration Manual DS85

031-300-190-169 REVISION B 01/06/04 190169_B

2.7.1 DGC Function “O” - Mainboom

1.2.5 SAE Radius display factor

1.6.1 Correction angle number 1 (first angle varies e.g. 78°)

1.6.2 Block correction in lbs.

1.6.3 Load correction in %

1.6.4 Block radius correction in ft.

1.6.5 Load radius correction in ft/1000 LB

1.7.1 Correction angle number 2 (varies)

1.7.2 Block correction in lbs.

1.7.3 Load correction in %

1.7.4 Block radius correction in ft.

1.7.5 Load radius correction in ft/1000 LB

1.8.1 Correction angle number 3 (varies)

1.8.2 Block correction in lbs.

1.8.3 Load correction in %

1.8.4 Block radius correction in ft.

1.8.5 Load radius correction in ft/1000 LB

1.9.1 Correction angle number 4 (varies)

1.9.2 Block correction in lbs.

1.9.3 Load correction in %

1.9.4 Block radius correction in ft.

1.9.5 Load radius correction in ft/1000 LB

1.10.1 Correction angle number 5 (last angle varies e.g. 20°)

1.10.2 Block correction in lbs.

1.10.3 Load correction in %

1.10.4 Block radius correction in ft.

1.10.5 Load radius correction in ft/1000 LB

Hirschmann PAT DS 85/0002 - Angle Theory