iFLASH
031-300-190-169 REVISION B 01/06/04 190169_B
15
3.3.3 Flash loader download
This dialog is used to transfer data from the flash memory of the iFLEX5 onto the PC.
A download is executed as follows:
1. Initiate the upload process by selecting Flash loader upload from the Program Pull-down Menu.
2. “Generate BRN file” will already be selected.
3. Select “Keep BIN file”, it will now have a check make by it as shown.
4. Choose the open folder icon to “select parameterfile for download process” and browse for file
location. The following software files must be given to you from PAT America in order to down
load the Data (datprom.adr).
5. Choose the open folder icon to “select filename for received data”. Name the file as follows:
D plus Serial number(XXXXX) and revision #(00,01,02…). (example DATA DXXXXX00.brn).
6. Select “Start Download” to begin down load. The progress bar will increase in blue as the
precentage.
folder icon
folder icon
Start download
To Next Page
Loading...
