iFLASH
031-300-190-169 REVISION B 01/06/04 190169_B
11
3.3.2 Flash loader upload
This dialog is used to transfer data (BRN files) into the Flash storage of the system. There are 3
different file types system, data, and TLK that will be uploaded for operation. Upload one or all three
files as necessary to update your system. Note: Only upload files received from PAT America. System
software is the operating software, which calculates and displays the system function. Data software is
crane dimensional data, which include measurements of boom, sheaves offset, and hoist position.
TLK software is the load charts. Both data and TLK software are required for the system software to
operate.
To upload, proceed as follows:
1. Initiate the upload process by selecting Flash loader upload from the Program Pull-down
Menu.
2. Choose the open folder icon, to browse for location of software on PC.
To Next Page
Loading...
