Calibration Manual DS85
031-300-190-169 REVISION B 01/06/04 190169_B
12
3. Select directory of where the software is stored in from the “look in” box.
4. Highlight
the software file you choose to upload. Ensure that file extension reads .BRN and press
Open. The following is an explanation of the software file names:
• System software: DGCTvXXX.brn (example:
DGCTv10H.brn, where DGCT is the software
designation, v is for version and 10H is the
version number)
• Data software: DXXXXXXXX.brn, the file name
begins with a D and then is followed by 6 to 9
digits, the crane model number and 2 digits.
(example D22101c00.brn)
• TLK software: TXXXXXXXX.brn, the file
name begins with a T and then is followed by 6
to 9 digits, the crane model number and 2
digits. The 2 digits are; 00 – main boom, 10 –
fixed jib, and 20 – tele jib.. (example
T22101c00.brn)
5. After the correct file is selected, press the “Start Upload” Icon.
Start upload
To Next Page
Loading...
