Hirschmann PAT DS 85/0002 - DGC Function O - Extensions

Quick Reference to "C" and "E" CALIBRATION
031-300-190-169 REVISION B 01/06/04 190169_B
9
2.7.2 DGC Function “O” - Extensions
3.2.5 SAE Radius display factor
3.6.1 Correction angle number 1 (first angle varies e.g. 78°)
3.6.2 Block correction in lbs.
3.6.3 Load correction in %
3.6.4 Block radius correction in ft.
3.6.5 Load radius correction in ft/1000 LB
3.7.1 Correction angle number 2 (varies)
3.7.2 Block correction in lbs.
3.7.3 Load correction in %
3.7.4 Block radius correction in ft.
3.7.5 Load radius correction in ft/1000 LB
3.8.1 Correction angle number 3 (varies)
3.8.2 Block correction in lbs.
3.8.3 Load correction in %
3.8.4 Block radius correction in ft.
3.8.5 Load radius correction in ft/1000 LB
3.9.1 Correction angle number 4 (varies)
3.9.2 Block correction in lbs.
3.9.3 Load correction in %
3.9.4 Block radius correction in ft.
3.9.5 Load radius correction in ft/1000 LB
3.10.1 Correction angle number 5 (last angle varies e.g. 20°)
3.10.2 Block correction in lbs.
3.10.3 Load correction in %
3.10.4 Block radius correction in ft.
3.10.5 Load radius correction in ft/1000 LB