Calibration Manual DS85
031-300-190-169 REVISION B 01/06/04 190169_B
2
CRANE MODEL:
SERIAL NUMBER
LMI COMPONENTS TYPE SERIAL NUMBERS
Console/ Central unit
Cable reel
Pressure transducer piston side
Pressure transducer rod side
REFERENCE VOLTAGES DGA CHANGES DGB CHANGES
Crane power (Term #1) = DGA 7.1.3=
DGB 6.20 =
DGA 7.1.4=
DGB 6.21 =
Console Service Display Voltages
DGA 7.2.3= DGB 6.22 =
Output of piston transducer, 0 pressure = DGA 7.3.3= DGB 6.23 =
Output of rod transducer, 0 pressure = DGA 7.8.3= DGB 10.1 =
Output of length sensor fully retracted = DGB 10.2 =
Output of length sensor fully extended = DGB 10.3 =
Output of angle sensor at zero degrees = DGB 10.4 =
DGB 10.24=
SOFTWARE INFORMATION
DGB 10.25=
DAT/TLK DGB 3.1.5 =
SYSTEM DGB 3.1.6 =
DGB 3.1.7 =
CONFIGURATIONS CALIBRATED
MAIN BOOM
30’ EXT.
20’ JIB
OFFSETS
AUX TIP
A-2-B
MAIN BOOM
AUX TIP
EXT
JIB
FUNCTION LOCK OUTS TESTED
BOOM DOWN
HOIST UP (MAIN)
HOIST UP (AUX)
TELESCOPE OUT
To Next Page
Loading...
