Hisense 32A4KV - Insert the Batteries; Important Information about Remote and Batteries; Remote Control Range Information; Power On the TV

6
Insert the batteries
1. Take off the back cover to open the battery compartment of the remote control.
2.InserttwoAAAorAAsizebatteries.Makesuretomatchthe(+)and(-)endsofthe
batterieswiththe(+)and(-)endsindicatedinthebatterycompartment.
3. Restore the battery compartment cover.
Important Information about the remote and batteries
• Discard batteries in a designated disposal area. Do not throw them into a fire.
• Remove old batteries immediately to prevent them from leaking into the battery
compartment.
• If you do not intend to use the remote control for a long time, then remove the
batteries.
• Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin then wash it immediately.
• Do not mix old and new batteries.
• Donotmixalkaline,standard(carbon-zinc)orrechargeable(NiCd,NiMH,etc.)
batteries.
• Do not continue using the remote if it gets warm or hot.
• Call our Support Center immediately on the support website.
Remote Control Range Information
●Theremotecontrolcanworkatadistanceofupto26feet(792.5cm)infrontofthe
TV set.
●Itcanworkata30degreehorizontalorverticalangle.
Step 4. Power on the TV
Plug the power cord into a power outlet.
Your TV will display a launch screen showing the Hisense logo.
Step 5. Complete the first-time setup
The first time you turn on your TV, there is a guided setup to make it easy to connect
your TV to the Internet and complete the setup of your TV.
Step 6. Establish a network connection
1. Press the [ Home ] button on the remote control, and select the
icon to enter into
the Settings menu
.
2. Select Network > Network Configuration.