Shortcuts Instructions
To turn your TV on or off :
1. Plug the AC power cord into a socket outlet of AC power supply.
2. When the TV is powered on, press the [
] button on the remote control, it goes into standby mode. Press
the [
] button again to turn on your TV.
1.1
Turning your TV on or off
NOTES
When your TV is in standby mode, it is still consuming power. To completely disconnect power, please
remove the mains plug from the mains socket.
If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1. Turn on your TV, then press the [INPUT] button on the remote, the list of Source appears.
2. Press the [< / >] buttons to select the input source.
3. Press the [OK] button to confirm your selection.
1.2
Selecting the Input Source
You can use shortcuts on the remote control for fast operation. Refer to the “ Quick Setup Guide ” for more
information.
1.3
Live TV
Channel search guide
When switching to Live TV, the TV detects the presence of the channel list information (Channel scan must
have been completed). If the scan has not yet been completed, a prompt will appear to begin scanning for
channels. Press the Begin scanning button to enter the channel search interface.
Launch Live TV
Upon first use, the screen will display Live TV operating tips, including: how to show the channel list, how to
start the PVR / T.Shift, how to view channel info and more.
OK
Show Channel List
Show PVR/T.Shift
View channel info
View recent channels
View channel Info
Show PVR/T.Shift
View recent channels
Show Channel List
OK
To Next Page
Loading...
Need help?
General
