To Next Page

To Previous Page

Attach the Wall Mount Bracket (not included)

Before you begin the third-party manufacturer instructions, be

sure to do the following things:

1. Place the TV face down on a clean, safe and cushioned surface.

2. Remove the TV stand if you already attached it.

3. Place the spacers (not included) in the corresponding bracket

holes.

Screw

(not provided)

CAUTION:

• Whenyouattachthemount,besuretousethespacers

(provided by the third-party manufacturer) between the TV

and the bracket.

• TopreventinternaldamagetotheTVandensureitis

mountedsecurely,besuretousefixingscrews(not

provided) that are 8 ~ 10 mm in length when measured from

the attaching surface of the mounting hook.

Rear cover of the TV Spacer

Screw

Wall mount bracket

8 ~ 10

Wall mount hole pattern

VESA (mm)

200 × 200

Wall mount screw size (mm) M6

Follow instructions provided with the Wall mount bracket.

To complete the installation, please contact the wall-mount

manufacturer or the retailer from which you purchased the TV.

The selected screws are 8 ~ 10 mm in length when measured

from the attaching surface of the rear cover. The diameter and

length of the screws differ depending on the Wall mount bracket

model.

NOTE: The diameter and length of the screws differ depending

on the wall mount bracket model.

Bracket

(not provided)

Spacer

(not provided)

Hisense H5 series User Manual

Questions and Answers: