3
MR6DE User Manual
Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
Fire
The product should be situated away from naked flame sources such as lighted candle.
Wall
Precautions for Installation
As shown in the figure below, leave a ventilation space around the device.
Please leave this space
around the device.
When mounted on the wall:
Do not install the device as shown below.
Hinder air circulation
Insufficient ventilation will overheat the device and may
cause damage to the device and even fire.
Start Guide
Declaration
Incorrect replacement of the battery may lead to the risk, including the replacement of
another similar or the same type. Do not expose batteries to heat such as sun or fire or
something like that.
The device should not be exposed to dripping and spraying and it cannot be placed under
objects filled with liquids.
MAIN plug on the power cord is used as the disconnect device, the disconnect deviceand
socket-outlet shall be easily accessible.
Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a
protective earthing connection.
To Next Page
Loading...
