9
NOTE:
When connecting a hard disk or a USB hub, always connect the mains
adapter of the connected device to the power supply. Exceeding a total
current consumption may result in damage. The USB2.0 device maximum
current consumption is 500mA. The USB3.0 device maximum current
consumption is 1A.
If the impulse current for an individual non-standard high-capacity mobile
hard disk is greater than or equal to 1A, it may cause the Laser Cinema to
reboot or lock.
The USB port supports a voltage of 5V.
USB devices for browsing photos, music and movies. This unit only recognizes USB
Memory Sticks.
To Next Page
Loading...
