EasyManua.ls Logo

Hisense PX2-PRO - Page 6

Hisense PX2-PRO
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
• If this device requires a repair, please wear laser eye protection with an optical density OD that is 4 or
higher and has a wave length of 459-651 nm.
• Do not place any water-containing vessel on this device, such as cosmetics or liquid medicine.
• If any object or water enters this device, please unplug this device and contact the service staff of Hisense.
• Do not place any exposed fire source (e.g. burning candle) on this device. Keep away from high temperature and heat.
• Do not expose the battery to direct sunlight or candle light.
• Keep air vents on both sides clear from any objects to prevent the device from overheating inside.
• To avoid a short circuit, product damage or electric shock, do not use any sharp object or metal to touch the ports or other
openings on the Laser Cinema.
• If this device has been in a warm environment, allow any built-up condensation to evaporate first BEFORE you switch the device
on.
• Do not allow a child to stand on or climb up this device.
• Do NOT place any object above or in front of the lens because the laser light could cause the object to become flammable.
• Clean the lens periodically with a clean cloth and make sure the Laser Cinema is turned off before you start.
Low Blue light Content
• The long-term exposure to blue light may damage your eyes, in particular the retina, causing visual fatigue or eye strain. Children
are particularly vulnerable to excessive blue light and the damage to them is irreversible. The product can decrease blue light ratio
to reduce blue light hazard.
Health recommendations
• Avoid long time continuous use product, ensure adequate break time.
• Looking at distant objects or exercises for the eye after use product.

Related product manuals