Switching off the appliance: switch off the appliance by pressing the
A key and holding it (for 3 seconds). The appliance will switch to standby
mode (it remains powered).
Adjusting the temperature in the appliance
INFORMATION!
• Appliance temperature is preset at the factory to the recommended setting, i.e. 4°C for the
refrigerator compartment and -18°C for the freezer compartment.
• After the appliance is switched on, it may take several hours for the set temperature to be
reached. Do not place any food into the refrigerator before the temperature drops to the
selected setting.
The temperature in the cooling compartment can be set by briefly
pressing the key E.
• Every time you press the E key, the temperature will be increased
by 1 °C. The setting you choose will be stored as the most recent
temperature set for the refrigerator compartment.
• Refrigerator compartment temperature can be set in the range from
+1 °C to +9 °C.
• Recommended temperature setting is 4°C.
The temperature in the freezer compartment can be set by briefly
pressing the key C.
• Every time you press the C key, the temperature will be increased
by 1 °C. The setting you choose will be stored as the most recent
temperature set for the freezer compartment.
• Freezer compartment temperature can be set in the range from -16°C
to -24°C.
• Recommended temperature setting is -18°C.
Control unit/display standby mode
INFORMATION!
30 second after you have pressed the most recent key, the control unit switches to standby
mode. All indicators on the control unit will be switched off. There are exceptions when some
indicators remain lit although the control unit is in standby mode. Such exceptions include the
following:
• If intensive freezing (freezer boost) is activated, then the indicator B2 will remain lit. All other
indicators are off.
19
To Next Page
Loading...
Need help?
General
