Control unit/display standby mode
INFORMATION!
30 second after you have pressed the most recent key, the control unit switches to standby
mode. All indicators on the control unit will be switched off. There are exceptions when some
indicators remain lit although the control unit is in standby mode. Such exceptions include the
following:
• If intensive freezing (freezer boost) is activated, then the indicator
D1 will remain lit. All other indicators are off.
• If the Eco function is acticated, the indicator E1 will still be displayed
in standby mode. All other indicators are off.
• If the manual freezer compartment defrosting function is activated,
then Cd will still be displayed on the C1 display unit, even when the
control unit is in the standby mode. All other indicators are off.
To switch back from the standby mode: briefly press the C key or open the refrigerator compartment
door. If the Eco function or the intensive freezing (freezer boost) function are activated, then the D or
E key, respectively, may also be used to switch back from the control unit standby mode, depending
on which function is activated.
Intensive freezing (freezer compartment)
• Use this setting after switching on the appliance for the first time, before cleaning, or before
inserting a large amount of food.
28
To Next Page
Loading...
Need help?
General
