• If the Eco function is acticated, the indicator E1 will still be displayed in standby mode. All other
indicators are off.
• If the holiday mode function is acticated, the indicator F1 will still be displayed in standby mode.
All other indicators are off.
• If the manual freezer compartment defrosting function is activated, then Cd will still be displayed
on the display unit, even when the control unit is in the standby mode. All other indicators are off.
• If one of the alarms is activated or if one of the faults is displayed, the display will show a specific
message.
Exit standby mode: briefly press any key or open the door of the cooling compartment.
Intensive freezing (freezer compartment)
• Use this setting after switching on the appliance for the first time, before cleaning, or before
inserting a large amount of food.
Power on: switch on the intensive freezing mode by pressing the key B.
You will hear a beep, and the display will light up B2 and show FF.
Power off: switch off the intensive freezing mode by pressing the key
again B.
If the function is not deactivated manually, it will be deactivated
automatically after approximately two days. The setting returns to the
most recent value.
INFORMATION!
• When the intensive freezing (fast freeze) function is activated, the appliance will operate with
maximum power. During this time, operation may be temporarily somewhat louder.
INFORMATION!
• When the intensive freezing (super freeze) function is activated, temperature may be lower
both in the refrigerator and the freezer compartment.
20
To Next Page
Loading...
Need help?
General
