Power outage/power supply failure alarm
If the temperature in the appliance reaches the alarm level during a power
failure, then the high temperature alarm will be activated once power
supply is restored. The alarm will sound and the display will flash PF.
Deactivate the alarm by pressing any of the keys. The display shows the
maximum measured temperature of the freezer compartment.
The next time you press the key, B the highest measured temperature
of the refrigerator compartment will be displayed.
If you press the key once more, B the power supply failure alarm will be finally deactivated, and the
set temperature for the selected compartment will appear on the display unit.
If the high temperature alarm is activated at the same time, it will operate as described in the chapter
High temperature alarm, after you have deactivated the power supply failure alarm.
25
To Next Page
Loading...
Need help?
General
