Hitachi airCore 700 - Page 33

29
INSTALLATION & MAINTENANCE MANUAL
Step3. Press " " or " " to select the item.
Press "
" or " " to set value(unit: L/s).
Step4. Select "
OK
" and press "OK" to save the setting and
return to Step2. Or press "
" to return to Step2
without saving the setting.
7.1.2.7 Minimum Airow Ratio
Step1. Select "Minimum Airow Ratio" and press "OK".
Step2. Press "
" or " " to select the item.
Press "
" or " " to set value.
Step3. Select "
OK
" and press "OK" to save the setting
and return to Zone Installation Menu.
Or press "
" to return to Zone Installation Menu
without saving the setting.
NOTE:
•
The value range of Minimum Airow Ratio is 01~99(%).
7.1.2.8 Damper Timing
Step1. Select "Damper Timing" and press "OK".
Step2. Press "
" or " " to select the item.
Press "
" or " " to set value(unit: Sec.).
Step3. Select "
OK
" and press "OK" to save the setting
and return to Zone Installation Menu.
Or press "
" to return to Zone Installation Menu
without saving the setting.
NOTE:
•
The value range of Damper Timing is 006~150(Sec.).
Airflow
OK
Back
unit: L/s
6 0
0
Zone Installation Menu
Damper Timing
Minimum Airflow Ratio
Airflow
BackOK Select
Turn On All Zones
Minimum Airflow Ratio
OK
Back
6 0 %
Zone Installation Menu
Damper Timing
Minimum Airflow Ratio
Airflow
BackOK Select
Turn On All Zones
Damper Timing
OK
Back
6
00
Sec.