--- 8 ---
7-5. Package
The table saw Model C 10RA2 is divided into the main body and the saw blade guard sections before packing and
shipping. Therefore, buyers of this machine are required to perform some light assembly. Instruct customers to
carefully read the assembly procedure in the Instruction Manual.
Dimensions of cardboard box (mm)
Fig. 4
7-6 Packing
(1) Remove the saw blade guard, rip fence
and the miter gauge from the main body.
(2) Set the saw blade to the lower limit
position.
(3) Disassemble the table saw stand.
(4) Pack the saw blade guard, rip fence and
table saw stand separately in each carton
box. Pack the miter gauge in the carton
box which is to be housed in the body
shell of the main body.
(5) Put the main body in the carton box.
(6) Put packing (A) and (B).
(7) Close the lids of the carton box and bind
them together.
1,045
690
370
Fig. 5
7-7. Related Laws and Regulations
The Model C 10RA2 has passed the C-UL standard. Therefore, the operator's safety is assured if it is operated
according to the Instruction Manual. The most important thing is to familialize the user with the machine, so
advise the user on correct operation and thus ensure the user's safety.
Misoperation will cause a serious accident. Please be very careful in advising the user.
Packing (B)
Packing (A)
Lid
Carton box
Box for rip
fence
Box for table
saw stand
Box for saw
blade guard
To Next Page
Loading...
