Hitachi C 10RA2 - 8 Precautions on Operation; Unpacking

--- 9 ---
8. PRECAUTIONS ON OPERATION
8-1. Unpacking
The parts illustrated in Fig. 6 are packaged together with the tool.
When unpacking, carefully confirm that all parts are accounted for.
Refer to the instructions packed in the carton box for the components of the table saw stand.
1. Miter gauge (1 piece)
2. Saw blade guard and spreader assembly (1 piece)
3. Elbow (1 piece)
4. Rip fence (1 piece)
5. Hex. wrench (1 piece)
6. Wrench (1 piece)
7. Handle bar (1 piece)
8. Grip (1 piece)
9. 6 x 90 mm Bolt (1 piece)
10. 6 x 110 mm Bolt (1 piece)
11. 6 mm Spring washer (2 pieces)
12. 6 mm Flat washer (2 pieces)
13. 8 x 20 mm Bolt (with/washers) (4 pieces)
14. Set plate (4 pieces)
15. Cushion (1 piece)
1
2
3
4
5
6
7
8
910
11
12
13
14
15
Fig. 6