--- 1 ---
1. PRODUCT NAME
Hitachi Table Saw, Model C 10RA2
2. MARKETING OBJECTIVE
The Model C 10RA2 was developed to upgrade and replace the current Model C 10RA.
The key features of the Model C 10RA2 are as follows:
(1) Smooth-sliding fence mounted on rails at the front and the rear of the table
(2) One-touch fence setting, thanks to a quick lock fence system
(3) More stable guide of a workpiece with the 3-inch-heigh fence (C 10RA: 2-inch height)
The basic structure of the product is the same as that of the Model C 10RA.
3. APPLICATIONS
Rip-sawing and cross-cutting of ordinary wood, hardwood, plywood, composite wood materials, plastics and
similar materials.
4. SELLING POINTS
Max. ripping width of:
360 mm (14-5/32") to the right of saw blade
400 mm (15-3/4") to the left of saw blade
864 mm (34")
High cutting capacity with
255 mm (10") chip saw
Equipped with 2.6 hp
high-power motor
Good work efficiency
with electric brake
Wide table
(including the extension wing, which
is standard with this model)
Smooth-sliding fence
One-touch fence setting
Fence height: 3"
To Next Page
Loading...
