Hitachi C 10RA2 - 10 Precautions in Disassembly and Reassembly; Disassembly

--- 21 ---
10. PRECAUTIONS IN DISASSEMBLY AND REASSEMBLY
Please follow the precautions below for disassembly and reassembly procedures. The circled numbers in the
following figures and the [Bold] numbers in the descriptions below correspond to the item numbers in the Parts
List and exploded assembly diagrams.
CAUTION: Prior to attempting disassembly or replacement of the saw blade, ensure that the power cord
plug is disconnected from the power source.
10-1. Disassembly
A. Disassembly of the saw blade section
Tools required:
• Phillips head screwdriver
• 10 mm Wrench
• 22 mm Wrench (standard accessory)
• 23 x 26 mm Wrench (standard accessory)
Fig. 23