Hitachi C 10RA2 - Operation, Assembly, and Adjustments; Unpacking and Assembly Procedures

--- 5 ---
Outer diameter
Saw blade
Inner diameter
Maximum
0˚ (right angle)
cutting
45˚ (bevel)
Maximum dado cutter size
(diameter x width)
Maximum ripping capacity
Table dimensions
(width x depth)
Table dimensions with
extensions (width x depth)
Voltage, Current
Motor
Rated input
Max. output
No-load speed
Electric brake
Dust collection port
Machine dimensions
(width x depth x height)
Net weight
Standard equipment
Optional accessories
HITACHI
C
C 10RA2/C 10RA
255 mm (10") 255 mm (10")
15.8 mm (5/8") 15.8 mm (5/8")
76 mm (3") 91 mm (3-9/16")
11 mm --- 63 mm (7/16" --- 2-1/2") 63 mm (2-1/2")
152 mm x 12 mm (6" x 1/2") ------
Right side 360 mm (14-5/32") Right side 305 mm (12")
Left side 400 mm (15-3/4") Left side 305 mm (12")
494 mm x 500 mm 680 mm x 560 mm
(19-7/16" x 19-11/16") (27" x 22")
864 mm x 500 mm
------
(34" x 19-11/16")
115 V, 15 A 115 V, 15 A
1,640 W ------
1,940 W (2.6 hp) ------
5,000 /min 4,600 /min
Provided Provided
O.D. 65 mm x I.D. 59 mm
------
(O.D. 9/16" x I.D. 5/16")
[C 10RA2]
965 mm x 825 mm x 410 mm
(38" x 32-1/2" x 16-1/8") 686 mm x 560 mmx 458 mm
[C 10RA] (27" x 22" x 18")
864 mm x 750 mm x 410 mm
(34" x 29-17/32" x 16-1/8")
[C 10RA2]
Net: 29 kg (64 lbs) Gross: 38 kg (84 lbs)
Net (with table saw stand): 38 kg (84 lbs)
Gross: 46 kg (101 lbs)
18 kg (40 lbs)
[C 10RA]
Net (with extension wing): 25.4 kg (56 lbs)
Gross: 29 kg (64 lbs)
255 mm (10") TCT 255 mm (10") TCT
saw blade (NT 36)
•••••••••••••••••••••
1 saw blade
••••••••••••••••••••••••••••••••••
1
Set plate
••••••••••••••••••••••••••••••••••••••••
4 Rip fence
••••••••••••••••••••••••••••••••••••••••
1
Wrench (22 mm)
•••••••••••••••••••••••••••••
1 Miter gauge
••••••••••••••••••••••••••••••••••••
1
Wrench (23 mm x 26 mm)
•••••••••••••••
1 Wrench (19 mm)
•••••••••••••••••••••••••••••
1
Elbow (chip extraction duct)
•••••••••••••
1 Wrench (13 mm x 22 mm)
••••••••••••••••
1
Table saw stand (Code No. 314819) Table saw stand
Push stick (Code No. 314324) Porta table
Dado insert (Code No. 314325) Rip fence
Miter gauge
Dado head set
Ring (for use with dado head set)
6. COMPARISONS WITH SIMILAR PRODUCTS
Item
Maker
Model