Hitachi C 10RA2 - Page 42

--- 38 ---
PARTS
C 10RA2
: ALTERNATIVE PARTS
ITEM
No.
CODE NO. DESCRIPTION
NO.
USED
REMARKS
52 318-113 CLAMPER 1
53 318-114 RUBBER BUSHING 1
54 318-115 ECCENTRIC SHAFT 1
55 949-558 NUT M8 (10 PCS.) 1
56 318-116 CLAMP BOLT 1
57 318-117 GRIP 1
58 314-484 TABLE INSERT FOR SAW BLADE 1
59 949-235 MACHINE SCREW M5X8 (10 PCS.) 2
60 949-342 FLAT HD. SCREW M6X25 (10 PCS.) 4
61 314-486 SEAL LOCK SCREW M6X20 1
62 318-118 MACHINE SCREW (W/WASHERS) M6X20 6
63 318-119 EXTENSION WING (LEFT) 1
64 318-120 SCALE (LEFT) 1
65 318-121 SCALE (CENTER) 1
66 314-490 SEAL LOCK SCREW M6X10 1
67 318-122 TABLE 1
68 318-123 RAIL 2
69 318-124 SIDE COVER (RIGHT) 2
70 318-125 SCALE (RIGHT) 1
71 318-126 EXTENSION WING (RIGHT) 1
72 318-127 SIDE COVER (LEFT) 2
73 318-128 HEX. SOCKET HD. CAP BOLT M6X35 16
74 314-512 BEVEL GEAR (A) 1
75 314-513 SLIDE PLATE 2
76 314-514 SLIDE BRACKET 1
77 949-455 SPRING WASHER M6 (10 PCS.) 4
78 949-803 BOLT M6X35 (10 PCS.) 4
79 315-042 MITER GAUGE ASS’Y 1 INCLUD.80-86
80 314-505 CLAMP HANDLE (B) 1
81 314-506 FLAT WASHER M6.4 1
82 314-507 MITER GAUGE 1
83 949-234 MACHINE SCREW M5X6 (10 PCS.) 1
84 314-509 ANGLE POINTER 1
85 314-510 PIN 1
86 314-511 SHEET BAR 1
87 967-469 HEX. SOCKET SET SCREW M6X6 4
88 314-516 FLAT WASHER M8X14.3 1
89 314-517 BEVEL GEAR (B) 1
90 314-518 SCREW BAR 1
91 314-519 NUT CHUCK M8 1
92 314-520 BODY 1
93 314-521 FLAT WASHER M6.4X12.7 1
94 314-522 SPECIAL NUT CHUCK M6 1
95 314-523 GUARD 1
96 949-455 SPRING WASHER M6 (10 PCS.) 1
97 949-255 MACHINE SCREW M6X12 (10 PCS.) 1
98 314-454 WASHER (A) 2
99 318-130 SET NUT 1
100 317-352 TAPPING SCREW D5X10 5
101 314-526 BLADE GUARD 1
102 314-527 FLAT WASHER M8X15 2
*
7
----
99