With the stand open, resting on a level surface, the stand should not move or rock from side to side. If the
stand rocks from side to side, the adjustable foot (A) need adjusting until the stand is balanced.
• Lift the stand slightly so that you may turn the adjustable foot
(A) until the stand no longer rocks.
• Turning clockwise will lower the foot.
• Turning counter-clockwise will raise the foot.
TO SECURE/LEVEL THE STAND (Fig. 4)
Fig. 3a
Fig. 3b
Fig. 3d
Fig. 3e
Fig. 4
WARNING: The table saw must be secured. A table saw that
is not properly secured may move or tip over.
19
English
A
D
B
G
H
C
E
F
A
A
To Next Page
Loading...
Need help?
General
