Installing the Driver and Utility 5-21
6. Copy the utility file to any directory in the system. In this procedure, the directory /tmp/ocmwork/ is made for example.
# mkdir /tmp/ocmwork
# cp -p /media/[path to the utility file] /tmp/ocmwork
# cd /tmp/ocmwork
# umount /media
<< Path to the utility file >>
OS Path to the utility file
RHEL 6 [x86] [x64] /RHEL6_4/Utility/elxocm06x/elxocm06x-[version].tgz
7. Extract the utility file.
# tar -zxvf /tmp/ocmwork/[utility file name]
<< Utility file name >>
OS Utility file name
RHEL 6 [x86] elxocm06x-[version].tgz
8. Execute the following shell script.
# ./install.sh -q
9. When the script is completed normally, reboot the system and the procedure is complete.
To Next Page
Loading...
