5-22 Installing the Driver and Utility
□ Uninstalling OneCommand Manager
The uninstallation procedure for the OneCommand Manager utility of the Compute Blade 2000 / Compute Blade 320 Fibre Channel
adapter is described below:
1. Log on the target system with "root".
2. Insert "Driver and Utility" or "Server installation and monitoring tool" media into the DVD-ROM drive of system console.
Select [Tools] - [Launch Virtual Media] located in upper side of Remote Console menu and open [Virtual Media Session] window.
Check the "Mapped" check box of the CD/DVD drive to set the virtual drive.
3. Mount the "Driver and Utility" or "Server installation and monitoring tool" media to any directory in the system, the directory “media” is
made for example
# mount /dev/cdrom /media
4. Copy the utility file to any directory in the system. In this procedure, the directory /tmp/ocmwork/ is made for example.
# mkdir /tmp/ocmwork
# cp -p /media/[path to the utility file] /tmp/ocmwork
# cd /tmp/ocmwork
# umount /media
<< Path to the utility file >>
OS Path to the utility file
RHEL 6 [x86] [x64] /RHEL6_4/Utility/elxocm06x/elxocm06x-[version].tgz
5. Extract the utility file.
# tar -zxvf /tmp/ocmwork/[utility file name]
<< Utility file name >>
OS Utility file name
RHEL 6 [x86] elxocm06x-[version].tgz
6. Execute the following shell script.
# ./uninstall.sh
7. When the script is completed normally, reboot the system and the procedure is complete.
To Next Page
Loading...
Need help?
General