6-10 Utility
・Windows Server 2008 R2 Environment
The following is firmware/bootcode update procedure by HBAnyware version 4.1a36
1. Select [Batch] on the menu bar and then select [Download HBA Firmware].
2. Click [Browse…] to select a firmware or bootcode file.
3. The "Firmware File Selection" dialog box appears. Select a firmware or bootcode file and then click [OK].
4. The tree appears in the screen as shown below. Select/unselect the checkbox corresponding to the adapter or adapter port to
select the target to be updated. Click [Start Download] to start updating.
To Next Page
Loading...
