7-4 Supplementary Notes on Fibre Channel Adapter Function
□ Exiting the BIOS Utility
The window of the BIOS Utility is different depending on BIOS Utility versions.
<< Using BIOS Utility version 2.02a2 or lower >>
1. Press [X] key and return to the following window and press [X] key again.
.
2. When the "BIOS Utility" terminates, the following message appears. Select [Y] as shown below. The system unit restarts.
Reboot the System to Make All the Changes to Take Effect!
REBOOT THE SYSTEM (Y/N):
Y: Restarts the system unit.
N: Returns to the initial setting screen.
•
•
•
Tip
To Next Page
Loading...
