Hitachi Compute Blade 500 Series - Page 29

Table 2-1 Factory default account settings for the system
administrator
Item Factory default
IP address of management module 192.168.0.1
URL of Web console https://192.168.0.1
Tip:
•
The above URL indicates the default IP address of management
module, and port number is not entered since using default number.
If you changed the IP address of management module, and the port
number of web console, enter the corresponding URL for your
environment.
• The URL is configured in the following form:
http://< IP address>:< port number> or
https://< IP address>:< port number>
• The default port number:
- http: 80
- https: 443
3. The login dialog box will be displayed when connected successfully.
Initial setup
2-5
Hitachi Compute Blade 500 Series Getting Started Guide