Hitachi Compute Blade 500 Series - Switch Module Configuration

Switch module configuration
Switch modules provide smooth and efficient communication between nodes
*
when using the switch module.
Tip: *:A node is a connection point, either a redistribution point or an end
point for data transmissions.
The following switch modules are available:
•
LAN switch module
• Brocade 10 Gb/sec DCB switch module
• Fibre Channel switch module
¢
Brocade 8 Gb/sec Fibre Channel switch module
¢
Brocade 16 Gb/sec Fibre Channel switch module
The above switch modules need to be setup before use.
• Management LAN port setting
Set the management LAN port.
• Password changing
Change the password of administrator (admin).
• New user ID creation
Create the new user ID.
This subsection describes initial setting procedures.
Initial setup
2-13
Hitachi Compute Blade 500 Series Getting Started Guide