Hitachi Compute Blade 500 Series - Powering on System Unit; Powering off System Unit

Powering on system unit
This section describes procedures to power on the system unit.
The management module starts booting automatically when the AC power is
supplied to the server chassis.
Turn on devices in the following order:
1. Management module
2. Switch module
Powering off system unit
This section describes procedures to power off the system unit.
Tip: To power on/off the system unit, you can use the web console. See
Management module configuration on page 2-4 to login.
1. Click Resources tab > Chassis. The following dialog box will be
displayed, and then click Action > ▼ > Shutdown.
2. The confirmation dialog box is displayed, and then click OK.
3-2
Powering on/off system unit
Hitachi Compute Blade 500 Series Getting Started Guide