107
Presentation tools
USB Display(Mac computer)
The projector can display images transferred from a computer via an USB cable (10).
• The image transmission from the computer is suspended while the
password-protected screen saver is running. To resume the transmission, exit
the screen saver.
•
If "Waiting for connection." remains displayed while the USB cable is connected,
remove the USB cable and reconnect after a while.
• Check our web site for the latest version of the software and its manual.
(
User's Manual (concise))
Follow the instructions that can be obtained at the site for updating.
NOTE
Hardware and software requirement for computer
• OS: Mac OSX 10.5(Intel)
Mac OSX 10.6(Intel)
Mac OSX 10.7(Intel)
This application is not compatible with Power PC.
• Graphic card: 16 bit, XGA or higher
• Memory: 512 MB or higher
• Hard disk space: 30 MB or higher
Starting USB Display
(continued on next page)
When you connect your computer to the USB TYPE B port on the projector
using a USB cable, the projector will be recognized as a CD-ROM drive on your
computer. Double click the CD-ROM, then
double click
"LiveViewerLiteForUSB_MacOS.app.".
The application, “LiveViewer Lite for USB”,
will close automatically when the USB
cable is unplugged. However, it may remain
displayed at times.
To Next Page
Loading...
