33
3.1.10 Projector Control
Item Description
MAIN
POWER Turns the power on/off.
INPUT SOURCE Selects the input source.
PICTURE MODE Selects the picture mode setting.
BLANK ON/OFF Turns Blank on/off.
MUTE Turns Mute on/off.
FREEZE Turns Freeze on/off.
MAGNIFY
Controls the magnify setting.
In some input signal sources, it might stop “Magnify” even
though it does not reach to maximum setting value.
MAGNIFY POSITION V
Adjusts the vertical magnify position.
MAGNIFY POSITION H
Adjusts the horizontal magnify position.
TEMPLATE Turns template on/off.
MY IMAGE Selects MY IMAGE data.
MY IMAGE DELETE Deletes MY IMAGE data.
(continued on next page)
The items shown in the table below can be
performed using the Projector Control menu.
Select an item with the mouse.
Most of the items have a submenu. Refer to the
table below for details.
Controls the projector.
• The setting value may not match with the actual value if the user
changes the value manually. In that case, please refresh the page by clicking
the [Refresh] button.
NOTE
3. Web Control
3.1 Projector Web Control (continued)
To Next Page
Loading...
Need help?
General